Email
CFW-N116E Fixed Window

CFW-N116E Fixed Window

CFW-N116E is a modern designed aluminum window system, it can be applied to fixed windows, casement windows,s and awning windows, also suitable for glass wall partitions. Without the opening parts, it cost less and also needs minimum maintenance.


  • Overview
  • Data
  • Benefit
  • Configuration

Overview of CFW-N116E Fixed Window

SystemFixed Window(Non-Thermal Break)
Model No.CFW-N116E
MaterialAluminum Alloy/Glass
HardwareChinese top brand(Kin Long)/Germany brand
Glass TypeTempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak
Cooperated Glass BrandVitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass
Surface TreatmentPowder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain
Profile Brand6063-T5/6063-T6
Thermal ProfileNon-Thermal Break
StandardsIn Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO
ApplicationResidential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization
System CustomisationAvailable


Data of CFW-N116E Fixed Window

Testing Data of CFW-N116E Fixed Window

TestPressureResults
Preloading(Clause 8.2.2 of AS/NZS4284:2008)+2.58kpaNo separation, plastic deformations or deleterious was observed
-2.58kpa
Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008)+774kPaNo water leakage was observed.
Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008)387-774-387 (Pa)No water leakage was observed.
516-1032-516 (Pa)
774-1548-774 (Pa)
Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008)+2.58kpaDuring the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits.
-2.58kpa
Operating force test (AS 2047-2014)--The operating force was within the allowable value.
Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008)+/-150PaThe rate of air leakage of the specimen was within the allowable values.
Water Penetration Test under Static Water Penetration Test under Static 4284:2008)+774PaNo water leakage was observed.
Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008)387-774-387 (Pa)No water leakage was observed.
516-1032-516 (Pa)
774-1548-774 (Pa)
Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008)+4.00kpaNo collapse of the test specimen was observed under the specified pressure.
-4.00kpa


Thermal Data of CFW-N116E Fixed Window

NFRC ProceduresNFRC100SB, NFRC200-2010 and NFRC500-2010
Software ToolsTHERM 7.4.3.0 and WINDOW 7.4.6.0
Configuration6mm Clear(CLR-TDE52C) + 12mm ARGON + 6mm Clear
Panel Dimension1100mm Wide x 1100mm High
FramePainted Aluminum
Panel U-value2.679W/m2k
Visible Light Transmission0.311
SHGC0.166


Frame Data of CFW-N116E Fixed Window

Parts LocationFrame Area/m2Edge Area/m2U-Value(Frame)
W/m2k
U-Value(Edge)
W/m2k
Header0.07830.06865.62741.9007
Left Jamb0.07830.06865.62741.9007
Right Jamb0.07830.06865.62741.9007
Sill0.07830.06865.62741.9007


Glass Data of CFW-N116E Fixed Window

Glass Data:6mm LB13-45#2HS+12AR+6mm Clear HST
Visible LightSHGCSCNFRC U-value
W/m3k(Argon)
STC
T%R-out%R-in%WinterSummer
51.92315
0.2711.3681.29436


Benefit of CFW-N116E Fixed Window

  • Aluminium profile width: 101.6mm, T=2.0mm. Applicable to Fixed Windows, Awning Windows, Side-hung Doors Combination, Swing Doors Combination, and Extra-long frames can be combined with pipe type installation, inflection point type installation, and Australian installation(waterproof rubber strip at the bottom).

  • Standard configuration: 6+12A+6mm double glazing glass or other configuration with the same thickness, such as DGU, laminated glass, glass built-in shutter, etc.

  • This series can be combined flexibly, it is easy to install, has a beautiful appearance, firm structure, and excellent waterproof performance. What's better, in line with the aluminum sub-frame, it adopts push mosaic installation to reduce the cost and time of installation. Especially it can make a big area of curtain wall, combine the advantages of "unit type curtain wall" to achieve a unique effect.


Configuration of CFW-N116E Fixed Window

Blog

  • 10
    Oct
    2022
    What Are the Features of Casement Windows?
    The kind of window has a lot of, common have push pull window, casement window, bay window and so on, the advantage and disadvantage of its of different kinds of window is different, you are in the ho...
  • 03
    Oct
    2022
    Installation of Precautions of Casement Windows
    Speaking of doors and windows, we believe that everyone is more familiar with. In many places, we can see the use of doors and windows. But what about casement windows? Do you know what kind of doors ...
  • 22
    Sep
    2022
    The Advantages of Aluminium Window Wall and Its Treatment Process
    Nowadays, there are many materials for constructing curtain walls, and people will choose the building materials they need according to the characteristics of their buildings. Aluminum window wall is ...
  • 15
    Sep
    2022
    What Are the Benefits of Using Curtain Walls?
    Speaking of curtain walls, I believe that for some partners, this professional word should not be very familiar with it, in fact, it is still relatively common in our lives, especially in some urban b...

Contact Us

Welcome your presence, you can send us an email, we will get in touch with you within 24 hours.